Feedback

Info

Construction

Die-cast aluminum housing made from low copper marine grade aluminum. Hanger bracket made from stainless steel with stainless steel hardware. Hanger Bracket provides 360° rotation and 15° tilt in either direction.

Diffuser

Clear or half frosted UV stabilized acrylic outer cylinder creates the optical chamber. Technical Optics (R1, R2, R3, R4, R5S and R5R) use Selux signature light pattern acrylic lens holder to secure proprietary silicone optics.

Lamping

High Flux LEDs mounted to metal core PCB and attached to aluminum heat sink for maximum LED performance and life. CCT tolerance within a 3 step bin and provided with a minimum CRI of 80. LED light engine has a reported lumen maintenance of 93% at 50,000 hours. L70 calculated greater than 100,000 hours.

Lighting
Finish

Tiger Drylac certified polyester powder coat finish

Dimensions

Total height is 23 3/16 (589mm) · Diameter of the fixture is 9 13/16 (250mm)

Weight

19.5 lbs.

Options

0-10V dimming · Hi-Lo Switching · Mid-Run Connector · House Side Shield

Certificates
NRTL Listed Wet 5 year limited warranty on LED light engine RoHS IP65
Technical drawings